项目 (Item)	数据 (Data)
认证(APPROVAL)
测试标准(Test standard)	IEC/EN60947-7-4: 2013/ UL1059
产品间距(Pitch) [mm]	7.5
极数(Poles)	01-24P
EN60947-7-4测试数据（ EN60947-7-4 Test data)	VDE certificate NO. 40041402
额定电压(Rated voltage) [V]	1000
额定电流(Rated current) [A]	41
额定连接容量(Rated connection capacity)(solid/stranded) [mm²]	0.2~6.0
过压类别/污染等级/绝缘材料组别 (Surge voltage category/pollution degree/material group)	III/2/I
工频耐压(Withstanding Voltage) [KV/min]	8.0
额定扭矩(Rated torque) [N.m]	/
UL1059测试数据（UL1059Test data)	UL File Number E228872
应用组别(Use group)	B	C	D
额定电压(Rated voltage) [V]	300	150	300
额定电流(Rated current) [A]	40	40	10
额定连接容量(Rated connection capacity) (solid/stranded) [AWG]	24-8
额定扭矩（Rated torque） [Lb. in]	/
通用数据(General data)	/
螺丝(Screw)	/
阻燃等级(Inflammability class)UL94	V0
环境温度(Ambient temperature) [℃]	-40~+105
相对湿度(Relative humidity)	5%-95%
抽样检验标准(Inspection standard）	MIL-STD-105E II
允收水准(AQL)	0.65
保质期(Warranty)	12 months
材质和电镀(Material and plating）	/
绝缘材质(Housing)	PA66
弹片(Spring)	Stainless不锈钢
焊脚(Pin header)	Copper，Sn plated紫铜，镀锡
接线方法(Wire connecting)
推荐剥线长度14~15mm; Recommended stripping length 14~15mm;
1.）单股硬导线，剥好对应长度的导线后，用配套辅件压下弹片后将导线接入； For solid wire, stripping wire to the appointed length ， put the wire into the hole after using the accessory depress the cage spring .
2.）多股柔性导线，剥好对应长度的导线后，可以直接连接或者配套使用对应标准规格的冷压端头，用配套辅件压下弹片后将导线接入； For stranded wire: stripping wire to the appointed length, can be directly connected or use of the corresponding standard insulated ferrule , then put the wire into the hole after using the accessory press the cage spring .